top of page

Teflon Cut with Diamond Loop Wire Saw

 Diamond Multi Strands Segements Wire Sa

Elmas Döngü Tel Testere ile Teflon Kesim

Döngü Elmas Tel Testere, düşük gerilimli, hassas ve pahalı teflonlar, küçük kesme kuvveti, dar çentikler ve kırılması zor, yüksek kesme verimliliği performansı için idealdir. Hans, elmas tel testereli elmas tel döngü için kişiselleştirilmiş öneriler de dahil olmak üzere müşterilerimizin ihtiyaçları için eksiksiz bir teknik ve uzun vadeli destek sunar.

Performance

Cutting Teflon (polytetrafluoroethylene or PTFE) with a Diamond Loop Wire Saw can present some unique challenges and considerations due to the material's properties. While diamond wire saws are more commonly used for hard and brittle materials, they can be adapted for cutting softer materials like Teflon:

  1. Material Softness: Teflon is a soft and low-friction material. Cutting it with a diamond wire saw requires a careful balance of force to avoid material deformation or burring.

  2. Precision Cutting: Diamond wire saws can provide precise cuts, which is advantageous when working with Teflon for applications like gaskets or seals that require tight tolerances.

  3. Reduced Heat Generation: Diamond wire saws tend to generate minimal heat during cutting, which is suitable for Teflon as it has a low melting point. Low heat generation helps prevent material distortion or melting.

  4. Clean Edges: Diamond wire saws can produce clean and burr-free cuts in Teflon, reducing the need for additional finishing processes.

  5. Speed Control: Controlling the cutting speed is crucial when working with Teflon to avoid overheating and material deformation. Slower feed speeds may be necessary.

  6. Wire Diameter: The choice of wire diameter on the diamond wire saw is essential. Thinner wires may be preferred for finer cuts and less material wastage.

  7. Surface Finish: Diamond wire saws can achieve a fine surface finish, which is suitable for Teflon applications where smooth surfaces are required.

  8. Lubrication: Teflon is self-lubricating to some extent, but adding a lubricating coolant or cutting fluid may further improve the cutting process and surface finish.

  9. Tool Life: The lifespan of the diamond wire loop may be longer when cutting Teflon compared to harder materials. It can vary based on factors like wire diameter and cutting speed.

  10. Safety: Proper safety precautions, such as using personal protective equipment (PPE) and working in a well-ventilated area, should be followed when cutting Teflon to avoid exposure to fumes.

While Diamond Loop Wire Saws are more commonly associated with hard materials, they can be adapted for Teflon cutting with the right parameters and adjustments. Achieving optimal performance when cutting Teflon involves careful control of cutting speed, feed rate, and lubrication to ensure clean and precise cuts without compromising the material's properties.

Feature

Features:

  1. Wire Diameter: With a wire diameter of 0.35mm-2.5mm, this saw is tailored for cutting marble. The specific workpiece specification (120mm x 120mm x 400mm) allows for versatility in applications, making it suitable for various projects.

  2. Cutting Speed: The impressive cutting speed of 30m/s ensures a quick and efficient cutting process. This speed is crucial for productivity, making it possible to complete tasks swiftly.

  3. Feed Speed: The feed speed is set at 15mm/min, providing precise and accurate cuts. This precision is vital to achieve the desired surface finish on marble with minimal room for error.

  4. Tensile Strength: The diamond wires used in the saw have a tensile strength of 150N, ensuring they are strong enough to endure the demands of the cutting process. This strength contributes to the wires' ability to maintain their shape and sharpness over time, resulting in consistent, high-quality cuts.

  5. Cutting Effect: One of the standout features of this saw is its remarkable cutting effect. With an Ra (surface roughness) of up to 0.7μm, it can achieve a smooth and polished finish on marble surfaces. This exceptional finish quality makes it suitable for a wide range of applications, including architectural projects and decorative pieces.

Application

Using a diamond loop wire saw to cut Teflon, also known as polytetrafluoroethylene (PTFE), can be advantageous in certain applications where precision, cleanliness, and minimal material loss are essential. Teflon is a challenging material to cut due to its low coefficient of friction, non-reactive nature, and heat resistance. Diamond loop wire saws are capable of achieving precise and clean cuts in Teflon for various applications, including:

1. Semiconductor and Electronics Industry:
   - Cutting wafers and substrates: Teflon is used as a protective layer or insulator in semiconductor and electronics manufacturing. Diamond wire saws can be used to cut wafers, substrates, and components with high precision, reducing material waste.

2. Medical Device Manufacturing:
   - Cutting medical tubing and components: Teflon is often used in medical devices due to its biocompatibility and chemical resistance. Diamond wire saws ensure clean and precise cuts in medical tubing, catheters, and other Teflon-based components.

3. Aerospace Industry:
   - Cutting gaskets and seals: Teflon gaskets and seals are used in aircraft and aerospace applications for their chemical resistance and reliability. Diamond wire saws can create accurate cuts in Teflon components, ensuring a proper fit and sealing.

4. Research and Development:
   - Custom shapes and prototypes: Researchers and engineers often require custom-shaped Teflon parts for experiments and prototypes. Diamond loop wire saws enable the creation of intricate and precise shapes in Teflon materials.

5. Industrial Manufacturing:
   - Cutting Teflon sheets and blocks: Teflon sheets and blocks are used in various industries, such as food processing and chemical manufacturing. Diamond wire saws offer an efficient way to cut these materials into specific dimensions.

6. Optics and Photonics:
   - Cutting optical lenses and components: Teflon is used as a substrate or protective layer for optical elements. Diamond loop wire saws can cut Teflon without damaging the optical surfaces, ensuring high-quality optics.

When using a diamond loop wire saw to cut Teflon, it's important to consider factors such as feed rate, tension control, and cooling to achieve optimal results. Additionally, proper safety measures, including personal protective equipment, should be followed when operating the equipment.

Diamension

Length Options:

  1. 840 mm  ;1600 mm;1870 mm;2000 mm;2100 mm;2250mm;2950mm;3000 mm;3200mm;3980mm;4000 mm;4200mm;4430 mm;4500mm;4780mm;5000mm;6740mm;7040mm;8000mm;9300mm.

  2. Diameter of Wire Saw:

  • The diameter of the wire saw can range from 0.35 mm to 2.5 mm, depending on the specific requirements of the cutting application. Different diameters may be chosen for different materials and cutting needs.

Grit Size Options:

  1. 70/80;140/170;170/200;200/230;270/325

Grit size options determine the coarseness or fineness of the diamond particles on the wire loop and are selected based on the material and the desired cutting characteristics.

With these length, diameter, and grit size options, you can choose the most suitable Diamond Wire Loop for your specific cutting application.

Customized:customized to meet specific size requirements based on your particular needs and applications. Customized sizes offer the flexibility to adapt to various projects and surfaces. Whether you require smaller sheets for precision work or larger sheets for more extensive tasks, Our factory can often accommodate your requests for diamond sandpaper sheets in the size that best suits your requirements. When ordering customized sizes, be sure to provide the dimensions and quantity needed to ensure you receive the tailored product you require.

How to Buy

Request an Equipment  Quote
Ready to buy stuff from Flexible,Request a quote now.
Become a Delare
Becoming a Flexbile Authorized Dealer
Shop
Browse Parts and equpments on our store
Solution
Flexbile solutions to help you tackle any challenge

Reviews

Yorumlar

Share Your ThoughtsBe the first to write a comment.

FAQ

Q: What are the advantages of a flap wheel?

Advantages. The advantages of a flapwheel over a traditional disk are twofold: The separate flaps each attack the workpiece surface at a slightly different angle, and this varies slightly with tool angle. This avoids the common problem with flat sheets, where they produce repeated identical scratches.

Q: What is the difference between flap wheel and grinding wheel?

Flap discs are ideal for grinding, blending, finishing, and polishing surfaces, as well as removing rust, paint, and weld seams. Grinding discs are typically used for heavy-duty material removal, such as removing large welds, and shaping and smoothing metal edges.

Q: What is the best flap disc for grinding welds?

Flap discs are good for removing heavy weld seams and excess material while providing a long service life: For general use, the recommendation is a 60-grit ceramic flap disc. For greater speed and stock removal, a Type 29 conical is the best choice.

Q: What is a flap disc grinding wheel used for?

A flap disc is an abrasive product used to contour and shape metal. It consists of overlapping abrasive flaps glued to a backing plate and is regularly used for welding, machining, heavy-duty equipment work, and industrial maintenance. Common applications include: Cleaning flash from molds and castings.

Q: What is the best grit for flap discs?

Deburring and deflashing: 60 grit abrasive grain is ideal for deburring and deflashing work. Rust removal and blending: Abrasive grit in the more expansive range from 60 to 80 is optimal for finer work like rust removal and blending.

Q: Which grit flap disc would leave the smoothest finish on metal?

For finishing and sanding metal, a 120-grit flap disc could be your best option. Flat head flap discs best suit the purpose of finishing metal.

Q: What is the best flap wheel for stainless steel?

Designed for both mild and stainless steel, flap wheels made from zirconia (or zirconium) abrasive ribbon (blue / green in colour) are ideal for use on most metals including stainless steel. Other flap discs on the market made from using aluminium oxide abrasive ribbon are not suitable for use on stainless steel.

Q: Can you put a flap disc on a bench grinder?

Unmounted large flap wheels can conform to most shapes and are especially effective on pipes, tubes and other cylindrical items and are designed to be used on a bench grinder, pedestal grinder, or straight finishing tool with a 1 inch arbor.

Diamond Abrasive Products
Diamond Abrasive Products
bottom of page